Moving to Apollo Federation 2

📣 If you haven't yet, see what's new in Federation 2.

You can (and should!) move your Apollo Federation 1 supergraph to Federation 2 incrementally, one component at a time. Your supergraph will work as expected after each step in the process, even while some of your subgraphs continue using Federation 1 schemas.

Each individual step of moving your supergraph has its own benefits, so it's useful to complete as many steps as you're ready to complete. You can always finish the rest later.

Here are the three steps for moving to Federation 2:

1. Upgrade your gateway to support Federation 2.

   You can upgrade to either of the following:

   • The GraphOS Router , a high-performance precompiled executable (recommended)

   • Version 2.x of the @apollo/gateway library, along with version 4.x of Apollo Server

2. Begin composing your supergraph schema with Federation 2 composition logic.

3. Update your individual subgraphs to use Federation 2 features and directives.

As with all infrastructure changes, we strongly recommend completing each of these steps with a test instance of your supergraph before performing them in production.

Step 1: Upgrade your gateway

For your Federation 1 supergraph to support Federation 2, you first need to upgrade its gateway to one of the following:

• The GraphOS Router. This is a high-performance, precompiled executable that is based on the Apollo Router Core and provides many benefits over the Node.js-based gateway.

  • We recommend moving to the GraphOS Router unless you've extended your Node.js gateway with functionality that the GraphOS Router doesn't currently support (this is uncommon).

• Version 2.x of the @apollo/gateway library, with version 4.x of Apollo Server

Moving to the GraphOS Router

• To get started running the GraphOS Router, see the overview .

• For guidance on moving to the GraphOS Router from your Node.js-based gateway, see this article .

Upgrading @apollo/gateway and Apollo Server

The @apollo/gateway library supports Federation 2 supergraph schemas in version 2.0.0 and later. These versions of @apollo/gateway require version 16.0.0 or later of the graphql library.

You can install updated versions of these libraries in your gateway project with the following command:

1npm install @apollo/gateway graphql

Apollo Server 3.x supports these updated library versions, however Apollo Server 3.x is deprecated. Therefore, we strongly recommend also upgrading your gateway to Apollo Server 4.

• Learn how to migrate to Apollo Server 4.

• If you're still using Apollo Server 2.x, we recommend migrating to v3.x and then migrating to 4.x.

Step 2: Configure your composition method

Federation 2 uses a completely new method to compose supergraph schemas. This method is backward compatible with Federation 1 subgraph schemas, and it provides the following benefits even for Federation 1 subgraphs:

• Helpful composition hints when schema definitions are inconsistent between your subgraphs

• Support for interfaces implementing other interfaces (which Federation 1 composition doesn't support)

Follow the instructions below to configure whichever composition method(s) you currently use:

Managed federation with GraphOS

If you use GraphOS to manage supergraph composition and deployment, you move individual variants of your graph to Federation 2 via the GraphOS Studio UI.Open the Settings page for the variant you want to move to Federation 2, then select the This Variant tab:Click Edit Configuration. The following dialog appears:In the Federation Version dropdown, select Federation 2 and click Save.Studio automatically begins composing your supergraph schema using Federation 2 composition logic. Your updated managed gateway automatically fetches the updated schema when it next polls Apollo:

1rover supergraph compose --config ./supergraph.yaml

After you configure these changes, make sure your router is using your newly created Federation 2 supergraph schema. (If you're using managed federation, your router will fetch the new schema from Apollo automatically.)

Your Federation 1 subgraphs are now composed using Federation 2 composition. The natural next question is, "What does this change about the behavior of those subgraphs?" And until the next step, the answer is: nothing!

Step 3: Update individual subgraphs

Federation 2 provides powerful new features that require making some changes to your subgraphs. These features include:

• Selectively sharing types and fields across subgraphs with @shareable

• Safely migrating fields from one subgraph to another with @override

• Hiding internal routing fields from graph consumers with @inaccessible

The schema changes you make are not backward compatible with Federation 1, which means you won't be able to use Federation 1 composition anymore unless you revert those changes.

Update your subgraph library

To use new Federation 2 features and their associated directives, it's helpful to update your subgraph library to a version that automatically supports those directives.

• If your subgraph uses Apollo Server and the @apollo/subgraph library, update @apollo/subgraph to version 2.0.0 or later like so:

  Bash

  copy

  1npm install @apollo/subgraph

• If your subgraph uses another server library, check the compatibility table to see whether it supports Federation 2 directives yet. If it does, consult that library's documentation to determine which version you need to update to.

  • If your library doesn't support Federation 2 directives yet, you can still use that library with Federation 2 if the library lets you add custom directive definitions to your schema!

Opt in to Federation 2

Add the following definition to your subgraph schema:

1extend schema
2  @link(url: "https://specs.apollo.dev/federation/v2.0",
3        import: ["@key", "@shareable"])

This definition identifies a schema as a Federation 2 schema, and it imports any federation-specific directives that the schema uses. Without this @link definition, composition considers a schema to be a Federation 1 schema, and it applies certain default settings for backward compatibility.

Add directive definitions if needed

Currently, not all subgraph libraries provide built-in support for Federation 2 directives (such as @shareable). If your library doesn't provide this support, you need to add the following directive definitions to your subgraph schema:

1# Required for all subgraph schemas
2scalar link__Import
3
4directive @link(
5  url: String!,
6  import: [link__Import],
7) repeatable on SCHEMA
8
9# Required if the corresponding directive is used
10directive @shareable on FIELD_DEFINITION | OBJECT

Definitions for all Federation 2 directives are available in this article . We work with library maintainers to help automatically add these schema definitions in as many subgraph libraries as possible.

Mark all value types as @shareable

By default in Federation 2, most schema fields are resolvable by only a single subgraph. In Federation 1, this is not true for value types :

Fed. 1 (invalid in Fed. 2)

1type Position {
2  x: Int!
3  y: Int!
4}

1type Position {
2  x: Int!
3  y: Int!
4}

For both subgraphs to resolve the above fields in Federation 2, the @shareable directive is required in both schemas:

Fed. 2

1type Position {
2  x: Int! @shareable
3  y: Int! @shareable
4}

1type Position {
2  x: Int! @shareable
3  y: Int! @shareable
4}

For more details, see Value types .

Update entity definitions

Federation 2 introduces subtle but powerful changes to entities . These changes require corresponding updates to their definitions in your subgraph schemas.

Remove unnecessary syntax

In Federation 1, an entity originates in one subgraph, and then other subgraphs extend the entity to add fields:

Fed. 1

1type Product @key(fields: "id") {
2  id: ID!
3  name: String!
4  price: Int
5}

1extend type Product @key(fields: "id") {
2  id: ID! @external
3  inStock: Boolean!
4}

In Federation 2, entities no longer have an originating subgraph. Instead, each subgraph can define an entity and contribute fields to it:

Fed. 2

1type Product @key(fields: "id") {
2  id: ID!
3  name: String!
4  price: Int
5}

1type Product @key(fields: "id") {
2  id: ID!
3  inStock: Boolean!
4}

Note the following in the Federation 2 subgraphs above:

• The Inventory subgraph no longer extends the Product entity.

• The Inventory subgraph no longer marks the Product.id field as @external.

  • The @external directive is no longer required for @key fields, but it is still required for @requires and @provides .

• Both subgraphs can resolve Product.id, even though it isn't marked as @shareable!

  • Unlike most fields, @key fields such as Product.id are @shareable by default. This is necessary for @key fields, because the gateway uses them to associate data from different subgraphs with the same object.

Mark @provides fields as @shareable

The @provides directive enables a subgraph to resolve a particular field only for specific query paths. It's supported in Federation 2 as it is in Federation 1.

However, if a subgraph @provides a particular field, that field must be marked as @shareable in each subgraph where it's always resolvable:

Fed. 2

1type Product @key(fields: "id") {
2  id: ID!
3  name: String! @shareable
4  price: Int
5}

1type Product @key(fields: "id") {
2  id: ID!
3  name: String! @external
4  inStock: Boolean!
5}
6
7type Query {
8  outOfStockProducts: [Product!]! @provides(fields: "name")
9}

Here, Query.outOfStockProducts in the Inventory subgraph @provides the Product.name field. Therefore, that field must be marked as @shareable in the Products subgraph (and @external in the Inventory subgraph, as in Federation 1). Otherwise, a composition error occurs.

Modify @keys for entity stubs

In certain cases, a subgraph references an entity without contributing any fields to it. In Federation 1, these cases look like the following:

Fed. 1

1type Product @key(fields: "id") {
2  id: ID!
3  name: String!
4  price: Int
5}

1type Product @key(fields: "id") {
2  id: ID!
3}
4
5type Review {
6  product: Product!
7  score: Int!
8}

The Reviews subgraph above uses Product as the return type of the Review.product field, so it needs to define a "stub" of the Product entity. This stub includes just enough information to identify a unique instance.

In Federation 2, stubs like Product should include resolvable: false in their @key arguments, like so:

Fed. 2

1type Product @key(fields: "id") {
2  id: ID!
3  name: String!
4  price: Int
5}

1type Product @key(fields: "id", resolvable: false) {
2  id: ID!
3}
4
5type Review {
6  product: Product!
7  score: Int!
8}

Setting resolvable: false tells the gateway that a subgraph doesn't define a reference resolver for a particular entity. This is most common when referencing an entity without contributing fields to it .

You're done! You should now have a Federation 2 supergraph that composes successfully and takes full advantage of new federation features. If you encounter an issue, please let us know in the community forums .